Anchorlift chains are top quality DIN 766 and USA standar calibrated chain for use on Anchorlift anchor windlasses. For the windlass to run smoothly, the chain needs to match the gypsy.
Anchorlift chains are adjusted and calibrated according to the DIN 766 and USA standard.
Available in hot dipped galvanized steel and stainless steel (most sizes).
The chain stowes itself in the windlass gypsy and the weight causes it to drop through the chain pipe.
Chain is favoured by many cruising boaters, it is compact in size, highly abrasion - resistant and liea firmly on the bottom in most conditions.
Europe DIN766 chain Hot Dip Galvanized / Stainless 316
New high quality Double Braid 24 plate super soft space saving rope/chain combination.
The inner core is special designed to keep the rope round and better grip to avoid slippage in gypsy.
Made with nylon rope, ready to use. Spliced with Anchorlift´s original hot dip galvanized HT chain or Stainless Steel HT chain.
New Pat. Pending soft compact splice between rope and chain that makes this rodes your best choice for trouble free operation.
Available in 4 different sizes and lengths.
Works with your anchor rollers to take the tension off the windlass by locking the chain. Handles 7 - 14 mm (1/4 - 3/8") chain.
Included a convinient foot tab for safe and easy operation. Mounted with 4 screw holes to increase breaking strength.
100% European made in mirror polished
316L stainless steel.
Secure the anchor while the boat is under navigation.
Model Number
Breaking Load
Chain size
92406
220 kgs / 490 lbs
6 mm (1/4")
92407
260 kgs / 570 lbs
7-8 mm (1/4"-5/16")
92410
460kgs / 1010 lbs
10-13 mm (3/8"-1/2")
Anchorlift seek ways to continually improv products, design and spesifications.
Products design and spesifications subject to change without notice.
We apologize for any spelling mistakes and errors on our website.
